Lifting Eye Anchors For Precast Concrete

Great Magtech (Xiamen) Electric Co., Ltd. is one of the leading manufacturers and suppliers of lifting eye anchors for precast concrete in China. Please feel free to wholesale high quality lifting eye anchors for precast concrete from our factory. If you have any enquiry about cooperation, please feel free to email us.

1. How do Lifting Eye Anchors Working Principle?

Round head studs transfer the load to the concrete through the round feet, so that higher allowable loads can be obtained with relatively short studs. Loads are efficiently transferred to concrete and reinforcement even in thin walls. Due to the axisymmetric shape of the round feet of the hanging nails, unlike other types of pre-embedded hanging nails/bolts, no special positioning is required when placing the hanging nails. Theoretically, longer studs can withstand larger loads because they can create larger concrete load cones. The failure analysis in the stud application is based on the strength of this load cone.

2. What is Lifting Eye Anchors for Precast Concrete

Embedded parts (prefabricated embedded parts) are components that are pre-installed (embedded) in concealed works. They are components installed during the pouring of the structure and used for lap joints when building superstructures. In order to facilitate the installation and fixing of the foundation of external engineering equipment. Most of the embedded parts are made of metal, such as steel bars or cast iron, and non-metal rigid materials such as wood and plastic can also be used.

3.Which Lifting Eye Anchors Suitable for You?

Lifting eye anchors are similar to foot anchors. But there is one eye underfoot that receives the tension rod. Eye anchors are primarily used for thin sections, lightweight concrete slabs, or shapes that must be handled at concrete compressive strengths below 2,000 psi. GME has a variety of foot pegs that can be customized.

4.Lifting Eye Anchors Application Safety Guidelines：

In order to meet the safety requirements, design, construction and lifting, the following aspects should be paid attention to:

a. It is forbidden to change and weld the round head hanging nail, and it is forbidden to remove the hanging nail and reuse it.

b. Please strictly follow the installation and use instructions of the round head hanging nail, and it is strictly forbidden to mix it with the system components of other manufacturers.

c. When designing concrete precast parts, please refer to this description or the sample for calculation and design. If you need data other than this description, please contact us.

d. At the same time, it is necessary to confirm that it can meet the current building codes, regulations and standards.

e. Since the stress point will change the internal stress distribution of the prefab during hoisting, the stress calculation should be carried out according to the designed hoisting state, and consider whether the prefab needs to be reinforced to avoid damage to the product. 

5.Why Choose Our Lifting Eye Anchors？

1. Focus on building materials manufacturing for more than 10 years

2. GME's products are enhanced during production by factory QA and quality control inspections, if required, each order can be sent with a certificate for reference backtesting

3. OEM/ODM capability: more than 10 years experience

4. Easy installation thanks to rotational symmetry optimized for automatic bolt feeding.

5. Quickly attach the lifting gear into the anchor.

6.  Sturdy and durable lifting device.

7. Our factory is customer-oriented for process management, emphasizing process control, quality cost management, and waste reduction. We also use advanced Product Quality Planning (PAPP), Potential Failure Modes and Effects Analysis (FMEA), Statistical Process Control (SPEC) Production Part Approval Process (PPAP), Measurement Systems Analysis (MAS) error proof methods to prevent defects from being occur.

6.Certification Display: