Tubular Lifting Sockets Precast Lifting Sockets Lifting Socket Rd 30

Great Magtech (Xiamen) Electric Co., Ltd. is one of the leading manufacturers and suppliers of tubular lifting sockets precast lifting sockets lifting socket rd 30 in China. Please feel free to wholesale high quality tubular lifting sockets precast lifting sockets lifting socket rd 30 from our factory. If you have any enquiry about cooperation, please feel free to email us.

1. Product Introduction of Tubular Lifting Sockets Precast Lifting Sockets Lifting Socket Rd 30:

The outer curved surface of the rubber compound has a hole at its apex to allow the anchor to extend out of the recess former. It is made of highly durable rubber encasing a high tensile steel bolt, complying with many international standards. The winch anchor must be installed with the correct rubber recess former, which secures the anchor firmly in place during casting. This provides a fast and safe installation and forms a recess for the hook ring. Only the right former is suitable for anchor points, and load groups are marked on each. The former can be used by floating in concrete or through bolts through a template. GME Recess Formers are used to accurately create the correct recess to accommodate the Locking Klaws and Lifting Clutches during casting, the Recess Former is moulded from a rubber compound exclusively developed to ensure longevity when in contact with concrete.The standard has 1.3T, 2.5T, 5T, 7.5T, 10T, 20T, 32T

2. The key Feature of Rubber Recess Former

• Hard oil resistant, yet flexible, rubber

• For attachment to steel and timber forms or floats

• Durable rubber case allows easy and clean removal

3. Easy to Use:

The Rubber Recess Formers round shape with threaded bolt for the T-Anchors are used to keep Ton T-Anchor in place within the Precast or Tilt-up formwork, while the concrete is poured. The threaded bolt and nut is used to attached the Rubber Recess Former to the Precast or Tilt-up Formwork. The Recess Former is removed at the same time as the removal of the formwork , once the precast concrete element has cured. After the removal of the Rubber Recess Former from the precast concrete element, the recess created by the Rubber Recess Former, allows space for the Precast Lifting Clutch to be attached to the T-Anchor.

The recess plug is spread open and set over the anchor head and is then attached to the mould using the stamped metal plate with the fixing bolt and wing nut. On tightening the wing nut, the recess plug is pressed against the mould and clamped around the anchor head at the same time.

5. Package Display: