banner
Home » Product > Lifting System For Precast Concrete Unit > Pin Anchor Lifting System
Product Categories

Safe, Simple And Efficient 2.5-26 Ton Flat Lifting System

The flat lifting system has steel parts inserted into the concrete, such as: double eye, herringbone, kick board,unilateral herringbone, sandwich board, etc. And the rubber mold of the partial rod, the wire rope spreader and the flat spreader. This is a safe, simple and very efficient system for transporting precast concrete components. For each flat spreader, we test one by one with the specified load safety factor and check for possible tolerances. The flat lifting system is made of high quality steel by stamping and hot forging. For each batch, we check the board products as required and check for possible tolerances and deviations. Both the hanging plate and the flat spreader have a safe working load

Send InquiryChat Now

Safe, simple and efficient 2.5-26 ton flat lifting system

 

1.Product description

Wire Rope Ring ClutchRing Clutch、Rubber/Plastic Recess Former and Fitting

 Safe, simple and efficient 2.5-26 ton flat lifting system    Safe, simple and efficient 2.5-26 ton flat lifting system   Safe, simple and efficient 2.5-26 ton flat lifting system

 

1.For each flat spreader, we test one by one with the specified load safety factor and check for possible tolerances

2.The flat lifting system is made of high quality steel by stamping and hot forging.

3.For each batch, we check the board products as required and check for possible tolerances and deviations.

4.Both the hanging plate and the flat spreader have a safe working load

 

2.Product Parameter (specification)

Flat Anchor

Safe, simple and efficient 2.5-26 ton flat lifting system  Safe, simple and efficient 2.5-26 ton flat lifting system

 

 

Load(ton)

Axial load

SIZE

T

T

A

C

L

                    2.5                                                  

1.4-9

30

6

90

2.0-9

30

8

90

2.5-9

30

10

90

                     5                                               

3.0-12

40

10

120

4.0-12

40

12

120

5.0-12

60

15

120

                                                                  10                                  

7.5-16

60

16

160

10.0-17

60

20

170

 

Rubber Recess Former and Fittings

Picture

Load group

Axial load

Picture

Load group

Axial load

Safe, simple and efficient 2.5-26 ton flat lifting system

(Ton)

(Ton)

Safe, simple and efficient 2.5-26 ton flat lifting system12

(Ton)

(Ton)

1.25

1.25

1.25

1.25

2.5

1.4-2.5

2.5

1.4-2.5

5

3.0-5.0

5

3.0-5.0

10

6.0-10.0

10

6.0-10.0

26

12.5-26

26

12.5-26

 

Ring Clutch

Safe, simple and efficient 2.5-26 ton flat lifting system

Load groupAxial load
(Ton)(Ton)
2.51.4-2.5
53.0-5.0
106.0-10.0
2612.5-26

 

3.Product feature and application

Safety introduction

1.All flat panel slats must be installed in accordance with the safe use guidelines.

2.Flat panel lifting is only for temporary use and cannot be used for permanent fastening purposes.

3.All technical data provided must be considered to ensure safe use.The T-bar is a consumable and cannot be used repeatedly (repeated lifting visits during lifting and transportation, not considered re-use)

Conditions that cannot be used, such as incorrect installation, or damage to parts, corrosion, visible deformation, etc.No one should stand underneath the concrete members during lifting and transport.

4.The GME flat spreader consists of a shackle and a spreader head that can move freely in any direction.The spreader head in each load group is adapted to the matching rubber mold and firmly clamps the head that matches the spreader.

5.The flat bar spreader clearly shows the use of tonnage and model. The use of the flat bar spreader in combination with the attached lifting plate must be checked twice a year by a professional. If there is any jam or deformation of the hook or the spreader head, it means at least.

 

4.Prodection details

1.The Gme T-Rod spreader is a lifting device for lifting and transporting prefabricated concrete units with hoisting. Its head has the function of flexible rotation and can be reused many times.

There is an identification mark on each of the T-bar spreaders to display the load group.

2.Each T-bar spreader is individually tested and has a breaking load greater than a 5:1 safety factor.According to experience, if it is used continuously according to regulations and different frequency of use, the T-bar spreader will reach the life priority after 2-5 years. If the spreader is used for more than one year, it must be carefully checked every time. For more than 2 years of continuous use, it is recommended to replace the new spreader.It is strictly forbidden to modify and handle the T-bar spreader, especially the welding operation.

 

Safe, simple and efficient 2.5-26 ton flat lifting system   Safe, simple and efficient 2.5-26 ton flat lifting system

 

5.Prodect qualification

Safe, simple and efficient 2.5-26 ton flat lifting systemSafe, simple and efficient 2.5-26 ton flat lifting systemSafe, simple and efficient 2.5-26 ton flat lifting systemSafe, simple and efficient 2.5-26 ton flat lifting system

 

6. Deliver,shipping and serving

Safe, simple and efficient 2.5-26 ton flat lifting system

 

7. Contact me

Mercer ChenSales Manager

Great Magtech (Xiamen) Electric Co., Ltd.Sales Deparment

Mobile/whatsapp:  +86-18950985859         QQ: 2726057223

Skype: greatmagtechelectric@outlook.com

blobblob

Hot Tags: safe, simple and efficient 2.5-26 ton flat lifting system, manufacturers, suppliers, factory, wholesale

Inquiry