Ring Clutch For Flat Lifting System

Great Magtech (Xiamen) Electric Co., Ltd. is one of the leading manufacturers and suppliers of ring clutch for flat lifting system in China. Please feel free to wholesale high quality ring clutch for flat lifting system from our factory. If you have any enquiry about cooperation, please feel free to email us.

What is Ring Clutch Introduction

 

GME Ring Clutch consists of a clutch body, a curved bolt, and a high-strength bail. the curved bolt is free to move in any direction. The clutch in each load group matches the shape of the recess former and incorporates a locking bolt which engages in the head of the cast-in anchor.

GME CE certificated lifting clutch (ring clutch) with high-grade 35CrMoV special casting head clutch and forged bolt. The forged bolt needs the same materials as the head. The lifting clutch hook was made with enough thickness and high-strength steel. The lifting clutch hook welded needs high quality and deeply to approval with X-ray machinery. The bail is made from robust, hardened, and tempered cast steel. The GME Ring Clutch meets the requirements of the "Safety regulations for lifting precast concrete units".

Ring Clutch Features

 

Installation and release are safe and simple. After the clutch is inserted over the anchor head and into the recess, the curved bolt is rotated into the closed position. The rotation of the standard bail is a full 360°.

Once engaged and supporting 400 lbs of load, the ring clutch cannot be released. Made with an electro-galvanized finish

Ring Clutch Specification

Ring Clutch Application and Installation

Ring Clutch is used with Fleet Lift Anchor for lifting and handling precast concrete panels. The Ring clutches are matched to the anchors by compatible design as well as by marking the anchor types and load groups. Only matching components will fit together.

When the head of the lifting clutch is inserted into the recess and anchor head, the bolt will lock down the anchor from the head of the lifting clutch. The lifting clutch casting head needs special head treatment to improve mechanical performance. 

1. The Ring Clutch is located directly over the head of a Fleet-Lift Anchor.

2. The ring clutch is pushed down onto the anchor head and the curved bolt is rotated through the engagement hole of the anchor and locked into position. The process of engaging the anchor and ring clutch is completed in seconds.

3. To disengage the anchor and ring the clutch, simply pull the curved bolt free of the anchor. This allows the ring clutch to be easily removed from the head of the anchor.

4. Recommends a minimum ¾" cover between the bottom of an anchor and the concrete surface. This minimum recommended concrete cover is to prevent anchor corrosion.

5. The load line should be in line with the center of the bail, lifting from the top of the bail only. Bail should never contact the edge of concrete to avoid bending the bail.

Warning

GME Ring Clutches may become worn after extended use or may be damaged through misuse, overloading, or several other factors, any one of which may affect the Safe Working Load of the Ring Clutch. Users must establish a system of periodic inspections which should include the following:

1. Inspect for general condition and wear.

2. Assure that the bail is free to rotate in all directions.

3. The ring clutch must be destroyed if the bail is bent or twisted.

4. Check the curved bolt for wear, cracking, or bending.

5. Check the clutch body for wear, cracking, or deformation.

6. If it appears that the Ring Clutch has been heated in any way, the clutch must be destroyed.

7. Check the engagement slot, if the gap is larger than dimension H, the clutch must be destroyed. Destroy any unit that is worn, damaged, bent, or twisted by cutting off the bail.

8. No repair or welding is permitted.

Wire Rope Ring Clutch / Cable Ring Clutch

 

Ring Clutch

 

Wire Rope Ring Clutch consists of a cable, swage, clutch body, and curved bolt handle. They are used with the Fleet Lift Anchor System. Designed to be used specifically for flat steel lifting. The Cable Ring Clutch is the same in function as the standard style ring clutch, except offering more flexibility. It is fabricated with a wire cable bail for more versatility. It is often an effective solution for difficult lifting and rotation challenges.

Ring Clutch

 

Compared with the standard ring clutch, Cable is more flexible than bail allowing some latitude in the direction of the lift. The handle allows for safer locking of the clutch into the lifting position
1 Available on special orders or limited quantities on hand. Special orders take 4 to 5 weeks.
2 Not to be used with High Capacity System Anchors.
3 Clutch capacities are rated at a 5:1 safety factor.

 Specification Of Ring Clutch?

Number#	Load Range (T)	L	W	A	D	E	F	H	Ultimate capacity in tension (lbs)	Weight(lbs)
GME001CB	2-3	23-3/4''	4-7/8''	10-1/2''	1/2''	1-1/8''	3-1/8''	2-1/2''	30000	3.87
GME002CB	4-6	25-1/2''	5-5/8''	10-5/8''	3/4''	1-7/16''	4-1/16''	3''	60000	7.38
GME003CB	8-12	33-1/2''	6-3/8''	15-1/2''	15/16''	2''	5-15/16''	3-3/8''	120000	22.11
GME004CN	12.5-22	62''	8/7-8''	21''	1-3/8''	2-7/8''	8-1/2''	3-5/8''	220000	60.63

Package of Ring Clutch

 

The small sizes are packaged in bags and then in plywood cases, and for big sizes will be packaged in plywood cases directly.

one-stop solution

professional team

high quality

Tensile testing Ring Clutch:

All production processes are according to ISO9001 standards, we will conduct tensile testing within in production process as QCM and make dimension inspection, tensile testing before shipment, and issue reports for our client.