banner
Home » Product > Shuttering Magnet
Product Categories
Building Material Machine Stainless Steel Steel Shuttering Magnet

Building Material Machine Stainless Steel Steel Shuttering Magnet

Do not use screws to secure the template, as this will damage your grinding machine. Try our shuttering magnet. The size of the mold can be adjusted, the suction is strong and does not move, and can be reused without damaging the grinding machine.

Send InquiryChat Now

One. Technical Description:

1. Composition Built-in high temperature resistant permanent magnetic core with external guide rod connection and stainless steel housing protection.


2. The principle utilizes the adsorption force of the strong magnetic core and the steel die table, and is transmitted to the stainless steel casing through the guide rod, and is horizontally positioned by the bayonet, and the high-hardness adjustable fastening screw generates strong downward pressure (Fig. 1 below), directly Or transfer the pressure through other fasteners (Figure 2 below) to secure the mold to the mold base.


3. Performance characteristics In the maintenance warehouse below 80 degrees, the magnetic force is not attenuated for a long time. The stainless steel casing makes the core magnetic force more concentrated. In addition, it has a very good protection effect on the magnetic core and does not rust in the harsh concrete environment.


4. Application range

A wide range of molds are produced on steel mold bases, such as steel, aluminum, wood, and rubber.


5. Specifications

800~1500kg suction capacity can be customized according to the actual mold needs ** suction matching magnetic box.

two. Instructions

1. Fixed laminated floor slab and wall panel

blob


2. Fixed window mold, door mold and other independent molds;

blob

3. Fixed wood template


three. Advantages compared to traditional construction methods

1. Easy to disassemble and install - save time and labor; traditional bolt fixing - difficult to disassemble, labor and labor

2. A multi-purpose box can be used for wood, aluminum, steel mold, and any combination; traditional method: bolt or thread fixed, the way often needs to change;

3. Fix the mold with strong magnetic core adsorption die table, no need to drill holes in the mold or mold table, no damage to the mold table and mold, greatly improve its service life; traditional method: after punching on the mold or mold table It is fixed by bolts, causing Permanentdamage. Over time, the surface of the component is uneven, the service life of the die table and the mold is short, and the cost is amortized.


Product number:

 

ITEM

SIZE(cm)

Net Weight(kg)

Box material

Full Force(kg)

GME-450

17*6*4

2

Iron

≥450

GME-600

17*6*4

2

Iron

≥600

GME-600p

17*6*4

2.5

Iron

≥600

GME-800

19*10*4

2.6

Stainless

≥800

GME-900C

28*6*4

2.7

Iron

≥900

GME-900S

28*6*4

4.2

Iron

≥900

GME-1000

20*9.5*4

2.7

Stainless

≥1000

GEM-1350

19*10*4

3

Stainless

≥1350

GME-1800

32*9*6

6.3

Iron

≥1800

GME-2100

32*12*6

7.2

Iron

≥2100

GME-2300

32*12*6

7.8

Iron

≥2300


The magnetic box is a magnetic fixing device specially developed for the production of precast concrete steel molds. Using the new super-strong rare earth permanent magnet NdFeB material, through the reasonable magnetic circuit design, the product has an adsorption force of more than 900 kg, and the product itself weighs only 3 kg. At the same time, we designed a simple and convenient switch button, which can make the template production accurate, safe and stable, and easy to disassemble.


The outer casing of the magnetic box is made of a new 304 stainless steel material, which is more effective against rust and corrosion.


According to the actual production requirements of customers, we have designed a variety of magnetic boxes with suction capacity of 600 kg, 800 kg, 1000 kg, 1350 kg and 2100 kg for customers to choose, and the product size can also be made according to customer requirements.


According to the channel template frequently used by domestic component factories, we have specially designed and manufactured a special fixture system, which can effectively fix the template, and it is convenient and quick to disassemble.


The magnetic box is a very important standard tool. According to the actual size and connection mode of the template, we can also design a very clever fixture system to use it. It is truly flexible, easy to assemble and disassemble, and securely fixed.


We are constantly researching and developing new magnetic fixtures to contribute to the PC construction industry, providing a full range of magnetic fixing solutions for the majority of PC component factories, allowing customers to spend less money and get better quality. product.

Hot Tags: building material machine stainless steel steel shuttering magnet, manufacturers, suppliers, factory, wholesale

Inquiry