In the production of precast concrete components, various switch holes and pipe holes should be reserved, and various connections or lifting sleeves are also required. The magnetic seat is used to fix it without damaging the platform to ensure that the embedded parts do not slip and are firmly fixed, and the magnetic seat can be repeated for a long time. Use, save cost, simplify operation, and improve efficiency.
After the junction box is inserted into the mold, it can be rotated, the direction can be adjusted arbitrarily, and the positioning only needs to be done once. After positioning the mold on the first floor, it can be used to the top. This kind of junction box is matched with the magnet suction cup, unlike the traditional nails and rivets to fix the junction box. Affect the demoulding and increase the difficulty of demoulding. Using this wire box pre-embedded magnet does not require drilling, leaving any traces on the surface of the object, and the operation is simple, thus saving a lot of time and labor.
After dismantling, because it will not cause damage to the junction box, it is basically maintenance-free, and it can be recycled with the template and can be reused. Through the reasonable design of the magnetic structure, we can make this fixed magnet into various shapes, which can be used with pipes and wire boxes of different shapes and sizes. In the design and production of the formwork system, according to the actual size and connection method of the formwork, very cleverly designed steps are used together, which truly achieves flexible combination, convenient disassembly and assembly, and firm fixation. Choose building insert suction cups that meet suction requirements and they will hold firmly to the mold table, simplifying prefabrication.
The construction suction cups are easy and quick to use by simply placing them where you need them and then removing them when the job is done. For the magnets used in this type of product, we generally choose the magnets with strong magnetism, small volume, and high energy, so that the embedded magnets in the entire wire box are small in size, which is convenient for loading, unloading, and handling.
