1. Listen to the sound to judge the type of the wall
The so-called listening to the sound to judge the type of the wall means that we use the object to hit the wall, and then judge the concrete wall and the brick wall according to the different sounds of different walls. This method is very easy to judge concrete walls as well as light block walls. The two different situations are as follows.
①. Concrete wall. For example, if we hit the wall with the side of our fist, and we hit the concrete wall, the sound produced is very dull, only the sound of our fist hitting the wall can be heard, and the wall can hardly be heard. sound. Then the walls are basically concrete walls.
②. Brick wall. We can also tap the wall with our fist, and when we tap, we also tap the surface of the wall with our fist. At this time, the sound is very loud, and there is a certain echo. The specific sound is the sound of booming, then the personal opinion given at this time is that this kind of wall is basically a brick wall.
2. Determine the type of wall according to the location
Let's look at where this wall is. Because of the different locations, the requirements for the type of wall are different. This method can also roughly determine whether the wall is a concrete wall or a brick wall. Specifically, there are the following three situations.
①. the outer wall. For the current building, all the exterior walls in the building are concrete walls. Because the outer walls of the building are basically load-bearing structures, the only thing that may not be a concrete structure is the lower part of the windows. For example, the lower part of our bay window is only a part of the brick wall, which may have been built later.
②. the main partition wall in the room is basically a concrete wall. The so-called main indoor partition wall mainly refers to the wall between our bedroom and the bed room, or the wall between the next door and the next door. This type of wall is basically a concrete wall. Another point is that most of the walls directly connected to the outer walls are also concrete walls.
③. The partition walls in the non-main parts of the room are generally masonry walls. The most common here is the partition wall between our kitchen and living room, the partition wall between the bathroom and the living room, and so on. There are also some walls added to some indoor space layouts, which are basically masonry walls.
Judgment based on architectural drawings
3. The specific method of judging the type of wall according to the architectural drawings is as follows.
①. Bearing wall. The so-called load-bearing wall is the common steel and concrete wall in our home, and the load-bearing wall is represented by blackening in the architectural drawings. That is to say when drawing this section of wall, black lines are used to fill the space between the two lines, so it can be clearly distinguished.
②. Masonry walls. All masonry walls are the walls that we need to use blocks later. This type of wall is a figure formed between two lines in architectural drawings. For example, if there are two lines in our inner wall, and no black is added in the middle, this type of wall is the later masonry wall.
The above views are for reference only.
