Great Magtech (Xiamen) Electric Co., Ltd. is one of the leading manufacturers and suppliers of anchor channel precast concrete hot rolled cast in channel in China. Please feel free to wholesale high quality anchor channel precast concrete hot rolled cast in channel from our factory. If you have any enquiry about cooperation, please feel free to email us.

What are Cast-in Channels?

Cast-in Channel systems are ideal anchoring components that are easy to install and can be adjusted. It consists of C-shaped channel steel and at least two anchoring nails or bolting nails arranged on the back of the channel steel. Hammer bolts or special "T" bolts and matching nuts and washers can be used to fasten any structural component.

C-shaped groove embedded parts are small in size, light in weight, easy to embed, completely eliminate the problems of welding and anti-corrosion, and completely eliminate fire hazards. It can be used in unit curtain walls to realize factory production. Compared with the original panel embedded parts, on-site bolting can save 60% of the embedded part's raw materials and 50% of installation time.

cast in channel feature

Material of Anchor Channel Precast Concrete Hot Rolled Cast in Channel

Our Cast in Channel is made of hot-dip galvanized Q235 carbon steel with at least two anchors on the back. Our material is bought from big Chinese factories such as HBIS, Baosteel, and Magang to guarantee quality, stability, and consistency. Many competitors buy materials from small factories or Recycled materials. Due to the impure composition, the tensile force and pull strength of the product are sharply reduced by at least 15-20%. The quality is not guaranteed, but the material price can be 8-20%.

Hot Rolled Cast in Channel

How to Select Cold Roll Cast in Channel-Cold formed C-groove?

Size	Pull Force	Standard size(mm)
Size	KG	Regular Length
28\15	120	100	150	300	3000
38\17	200	100	150	300	3000
40\25	250	100	150	300	3000
49\30	400	100	150	300	3000
Other lengths can be customized according to your needs. Safety factor 3:1. Stainless steel SS304 and SS316 can also be customized according to the requirements Surface treatment: primary color, electro-galvanized, hot-plated

How to Select Hot Rolled Cast in Channel-Hot rolled C-groove?

Size	Pull force	Standard size(mm)				Anchor
Size	KG	Regular Length				Anchor
40\22	250	100	150	300	3000	bolt anchor\welded anchor
50\30	400	100	150	300	3000	bolt anchor\welded anchor
52\34	800	100	150	300	3000	bolt anchor\welded anchor
55\42	800	100	150	300	3000	bolt anchor\welded anchor
72\48	1000	100	150	300	3000	bolt anchor\welded anchor
Other lengths can be customized according to your needs. Safety factor 3:1. Stainless steel SS304 and SS316 can also be customized according to the requirements Surface treatment: hot-plated

What are the Solutions for Rolled Cast in Channel?

Fusion welding is a method in which the workpiece interface is heated to a molten state during the welding process, and the welding is completed without pressure. During fusion welding, the heat source rapidly heats and melts the interface of the cast-in channel groove embedded parts to be welded to form a molten pool. The molten pool moves forward with the heat source, and after cooling, a continuous weld is formed to connect the embedded parts into one.
Pressure welding is to make cast-in-channel groove embedded parts realize interatomic bonding in a solid state under pressure conditions, also known as solid-state welding. The commonly used pressure welding process is resistance butt welding. When the current passes through the connection end of the slot-type embedded part, the temperature rises due to the large resistance. When heated to a plastic state, the connection becomes one under the action of axial pressure.
Brazing is to use a metal material with a lower melting point than the workpiece as the solder, heat the C-shaped groove embedded parts and the solder to a temperature higher than the melting point of the solder and lower than the melting point of the embedded parts, and use the liquid solder to infiltrate. The workpiece fills the interface gap and realizes the mutual diffusion of atoms with the workpiece, so as to realize the method of welding.

Benefits of Rolled Cast in Channel:

The reliability of C-shaped groove embedded parts can reach a certain level, the production quality is stable, and the pull-out force can destroy the load up to 72KN.
It has good conditioning properties and can perform three-dimensional conditioning. Its special connection method can absorb relatively large civil engineering errors and has a large residual adjustment capacity, while the adjustment residual ability of flat embedded parts is smaller than that of the C type.
Sensitive connection: It can be directly connected to various transmission systems to simplify the connection and reduce the construction process. Flat embedded parts have poor sensitivity. When connecting to the system, angle or steel plates must be welded, which adds to the process.
No Welding Required: T-bolts can be attached and no field welding is required, which reduces process and cost, shortens construction time, and has no hidden fire hazards.
Easy to embed: small size, lightweight, reinforced I-beam (maximum length 110mm) and three-column arrangement, easy to connect with the main structure.