banner
Home » Product > Shuttering Magnet
Product Categories

Precast Concrete Magnet GME2100kg

According to the channel template frequently used by international component factories, we have deliberately designed and manufactured a special fixture system, which can effectively fix the template, and it is convenient and quick to disassemble. The magnetic box is a very important standard...

Send InquiryChat Now

According to the channel template frequently used by international component factories, we have deliberately designed and manufactured a special fixture system, which can effectively fix the template, and it is convenient and quick to disassemble.


The magnetic box is a very important standard tool. According to the actual size and connection mode of the template, we can also design a very clever fixture system to use it. It is truly flexible, easy to assemble and disassemble, and securely fixed.


We are constantly researching and developing new magnetic fixtures to contribute to the PC construction industry, providing a full range of magnetic fixing solutions for the majority of PC component factories, allowing customers to spend less money and get better quality. product.


201808091545534538613.jpg

Precast Concrete Magnet GME2100kg.jpg


Application:

image008.jpg


Certificate of Stepped magnetic box customized 1350 KG

image008.jpg

Often used in:


Magnetic template in precast concrete production process, pre-embedded casing magnetic holder, pre-embedded wire box magnetic holder, pre-embedded screw magnetic holder. Whether it is in the side mold of precast concrete, the internal pipeline is reserved, or it has an indispensable role in lifting transportation.


Maintenance knowledge:


First, in the use of the magnetic box, it should avoid the debris at the bottom, affecting the adsorption force of the magnetic box and the mold table.


The company's magnetic box is made of high-performance rare earth permanent magnet material, which produces a strong magnetic attraction in the magnetic circuit.


When the magnetic box is in working state, the suction surface at the bottom of the magnetic block is closely attached to the steel mold platform, and is firmly held. However, when there is foreign matter (such as concrete, grease, film) at the bottom of the magnet block, it can not be closely attached to the platform, and the holding power will be significantly reduced.


Second, clean up suggestions


Before using the magnetic box, check that the bottom of the magnetic block and the platform are clean and flat. If there is foreign matter at the bottom of the magnetic box, it can be cleaned with a stainless steel scraper (the iron scraper will be adsorbed and cannot be cleaned). If there is any material that is difficult to clean, such as concrete, it can be cleaned with a sander. Install the wire polishing plate on the sander as shown below and polish the bottom of the magnet block.


Third, gently take care to prevent damage to the magnet inside the magnetic box


Because the high-performance permanent magnet material used in the magnet is sintered by rare earth materials, its texture is similar to that of ceramics, it is hard and brittle, and it is easy to be broken.


Therefore, during the use of the magnetic box, it should be prevented from falling and chaotic, and it cannot be thrown at a long distance when the mold is removed. Avoid using a hard tool (such as iron big hammer) to knock, bump, etc., causing the magnetic box to deform.


Fourth, the magnetic box collection recommendations


After the magnetic box is used, the magnetic box should be cleaned and placed on the stainless steel cart to keep the magnetic box clean for convenient use. The magnetic box should not be placed on the iron car to avoid it being caught.








Hot Tags: precast concrete magnet gme2100kg, manufacturers, suppliers, factory, wholesale

Inquiry