banner
Home » Product > Shuttering Magnet
Product Categories

Magnetic Formwork Shuttering Precast Concrete Magnet Shutter Magnets

Precast concrete magnet shuttering magnets shutter magnets Precast concrete magnets are a useful and a high tech method of fixing formwork to the casting bed. They are made from rare earth neodymium magnet, which give higher pulling-off force than other magnetic materials. The shutter magnets...

Send InquiryChat Now

Precast concrete magnet shuttering magnets shutter magnets
Precast concrete magnets are a useful and a high tech method of fixing formwork to the casting bed. They are made from rare earth neodymium magnet, which give higher pulling-off force than other magnetic materials. The shutter magnets are designed so that the magnetic portion is layered with steel to spread the magnetic flux to increase the contact area.
Housings surrounded with magnet can protect against damage, and the steel may be used to bolt a housing to the neodymium magnet.
 
The precast concrete magnets has been searching for a more economical and efficient formwork method. In the past, some conventional magnets were used to position and fasten the formwork, but considerable mechanical loads with a hammer were required, which was easy to damage the magnets and the surface of the expensive formwork tables as well. In order to facilitate the formwork activities, GME is developing and manufacturing our own shuttering magnet to solve this problem successfully.
 
Our shuttering magnet provides quick operation leading to improved efficiency when setting out and breaking down the formwork. It consists of a switchable neodymium magnet unit and a steel casing which forms a certain designed magnetic circuit. By pressing the button on top of the steel casing, this magnetic force is activated so that this shuttering magnet can fasten the formwork to the steel table tightly. In a deactivated mode, by means of two threaded holes integrated on the top, the neodymium magnet inside is easy to position and can be equipped with various adapters, which provide unlimited options for use.
 
Magnetic shuttering solutions for precast concrete formworks!
(adhesive force from 450 to 2100 kg) for your rationalization ideas for shuttering construction, both for wood as well as steel shuttering elements. The adaptor technology presents you with unlimited options for use, which meet your requirements at all times. The SPB platform guarantees you the greatest possible flexibility for the future as well.

Characteristics
. Use with wood or steel formworks
. Easy to operate
. Simple and exact positioning
. Adhesive force ranging from 450 Kg to 2100 Kg
. Avoid welding or bolting to the formwork table therefore preserving surface finish
. Same magnet can be used for different purposes
. Integrated threaded holes to adapt formwork
. Adapters to be custom made


There are many shutter magnets types available.

ITEM

SIZE(cm)

Net   Weight(kg)

Box   material

Full   Force  kg

GME-450

17*6*4

2

Iron

≥450

GME-600

17*6*4

2

Iron

≥600

GME-600p

17*6*4

2.5

Iron

≥600

GME-800

19*10*4

2.6

Stainless

≥800

GME-900C

28*6*4

2.7

Iron

≥900

GME-900S

28*6*4

4.2

Iron

≥900

GME-1000

20*9.5*4

2.7

Stainless

≥1000

GEM-1350

19*10*4

3

Stainless

≥1350

GME-1800

32*9*6

6.3

Iron

≥1800

GME-2100

32*12*6

7.2

Iron

≥2100

GME-2300

32*12*6

7.8

Iron

≥2300



Technical drawing for reference:
HOI_D{R@4FJ9%S~W4GBJQXS.png
Application of Precast concrete magnet shuttering magnets shutter magnets
Care should be taken when using the shutter magnets to ensure the base is clean and free from debris; otherwise the debris causes a loss of strength due to a large air gap between the magnet and the machine or tools.
the precast concrete has been formed into a new green commercial mold to site-cast concrete. It's already being applied in a wide range of walls, floors and even roofs from private house to a giant building with much more durability, flexibility and of course economically. Due to these brilliant performances, many construction companies are adapting it as their new working method from Europe, Southern America to UAE, India and now spreads to China as well.

Hot Tags: magnetic formwork shuttering precast concrete magnet shutter magnets, manufacturers, suppliers, factory, wholesale

Inquiry