Prefabricated concrete magnets are suitable for various formwork construction steel and plywood formwork systems and corresponding adapters. They are composed of Nd-Fe-B magnets and blackened iron boxes. Workers can push or pull the buttons above to make the bonding force or bond the boxes with steel. It is very convenient to use.Send InquiryChat Now
GME Precast Concrete Magnet is a magnetic fixing device specially developed for fixing prefabricated concrete mould form. Compared with the traditional bolt fixing method, the Precast Concrete Magnet has the characteristics of quick disassembly and assembly, flexible operation and strong fixing force, which effectively improves labor efficiency and reduces the wastage of the die table has been widely used at home and abroad. GME-900 Y adopts yellow baked varnish, brings a fresh and bright feeling to people.
Full Force （kg）
Before using the Precast Concrete Magnet, check whether the bottom of the magnetic block and the platform are clean and flat. If there is a foreign matter on the bottom of the Precast Concrete Magnet, it can be cleaned with a stainless steel scraper (the iron scraper will be adsorbed and cannot be cleaned). If there are concrete or other substances that cannot be cleaned easily, it can be cleaned with a grinder. As shown in the figure below, the wire polisher is installed on the grinder and the bottom of the magnet is polished.