Plastic Nailing Plate.
Our plastic nailing plates are used to fix socket anchors to the formwork. The recess formed by the nailing plate is perfect for our threaded transport anchor system.
These magnets are a shielded magnetic assembly.
Due to the lower magnetic conductivity of the stainless steel housing, the magnetic forces are lower than with steel. Temperature resistant to 390°F (200°C).
Lifting loop is a M threaded insert for the lifting purpose. It can be used for the transport of beams,panels and slab etc. A rebar must be passed through the cross hole to transfer the load into the concrete.
Lifting loop is a M threaded insert for the lifting purpose. It can be used for the transport of beams,panels and slab etc. A rebar must be passed through the cross hole to transfer the load into the concrete.
GME has been manufacturing products for the permanent connection of concrete structural elements – in particular precast elements. These GME innovations have considerably facilitated work on the building site.
Lifting sockets with flat end complies with the safety rules for transport anchors for precast concrete units. The lifting socket may only be used in combination with a lifting loop (angle smaller than 45°) or Special Lifting Device (angle larger than 45°).
Can be used for a wide range of applications in precast construction such as lifting anchors for beams and grinders, wall and floor slabs, etc. To develop the load rating, a bent reinforcement bar must be inserted through the cross hole. Stocked in plated...
Product Introduction of Flat Anchor Two Hole Anchor For Precast Concrete The spread anchor is very flexible. It provides an effective anchor in thin sheets and slats. For special applications, additional reinforcement can be combined with the expansion...
